Products catalog
In stock
CONE CRUSHER: Cedarapids MVP380 with a single 300 HP electric motor with electrical switchgear.
CRUSHER LINERS: ESCO 14R Medium Fine Liners. Approximately 15% remaining life.
CRUSHER SERIAL NUMBER: 48944.
DISCHARGE CONVEYOR: 36"x approximate 23' rear discharge product conveyor with 20 HP...
Group: Repair parts and stuffs for a build technique
In stock
PRO 5X16 3 DECK INCLINE SCREEN:
20 HP TEFC with pivot motor base and power and belt.
2" top deck, 7/8" middle deck, 3/8" bottom deck screen cloth.
3/8" PL side walls, with 2"x3" angle iron reinforcement on edges.
Hutch bolted screen decks, constructed of 4"x3"x3/8" angle
iron and 3"x2"...
Group: Machinery for construction
In stock
These portable belt feeders are available with 24", 30", 36", 42", or 48" belt widths with variable speed control. The hopper size is approximately 15 cubic yards (8'6" wide x 16'0" long). Manual or hydraulic grizzly's are available. Call for additional information.
Group: Machinery for construction
In stock
PRO 42"x17' VIBRATING GRIZZLY FEEDER:25 HP TEFC variable speed electric motor drive.
T1 adjustable grizzly bars.
1/2" side walls with 1/2" AR bolt-in liners.
8" WF cross members on 18" centers.
Alco high temper isolation springs.
90 MM Torrington YM spherical bearings.
Solid steel machined...
Group: Machinery for construction
In stock
Dimensions: Width-16'0" Height-11'0" Depth-8'6"
General: This was used with a 6 CY Wheel Loader, and is built with adjustable grizzly bars 7/8"x5 1/2', removable - not welded in place, and a hinged top section. Presently set up with 4" spacing and 2" screen cloth on top of the bars.
Group: Production equipment
In stock
SPECIFICATIONS:
Size: 4' wide x 10' long inclined screen
Maximum feed size: 6-8"
Operating Angle: 5 to 15 degrees
Machine weight: 4,300#
Shaft speed: 970 RPM
Bearings: 80mm Driven sheave: 9"
Drive sheave: 5" (Optional - not standard equipment)
Required HP: 10 HP, 1800 RPM, TEFC (Optional -...
Group: Equipment for building
In stock
SPECIFICATIONS:
Size: 6' wide x 16' long inclined screen
Maximum feed size: 16"
Maximum top deck opening: 5"
Maximum drop of feed: 18"
Side plate thickness: 3/8"
Reinforcing plate: 1/4"
Feed box liners: 3/8"
Discharge lip liners: 5/16" Machine weight: 12,150#
Maximum stroke: 1/2"
Shaft...
Group: Equipment for building
In stock
Screen: Nordberg 6'x20' 3-Deck Inclined GP Screen.
Horsepower: 25 HP electric 3-60-240/480, less electrical starter.
Conveyor: 36" wide x approximately 20' long underscreen discharge belt.
Drive: 10 HP electric motor drive.
Undercarriage: Spaulding Equipment Company two Axle chassis.
Group: Equipment for building
In stock
Feed opening: 10"x47"
Maximum feed size: 8"
Jaw plate length: Fixed 28", Swing 31"
Closed side setting range: 3/4" to 3"
Machine weight: 16,900 lbs.
Crushing capacity: 20 to 80 TPH
Replacement bearings: 200 mm, SKF 22240CC/W33, center groove lubricated
Speed eccentric shaft: 330 RPM...
Group: Equipment for building
In stock
2000 Reconditioned 30x42 portable jaw crusher plant.
Pioneer 30x42 Jaw Crusher, S/N: 36U1904, reconditioned in 2000.
200 HP electric motor drive for jaw crusher.
2000 outdoor electrical switchgear panel for all on-plant requirements including a soft start #5 for the Jaw Crusher, plus 3 off-plant...
Group: Equipment for building
In stock
SERIAL NUMBER: 42444 - date of manufacture 1983.
POWER: 150 HP Electric motor drive; less starter.
General:
This is a skid mounted unit equipped with an oil tank and radiator cooled oil system. The crusher is in running condition and the liners have approximately 75% wear life remaining.
Group: Repair parts and stuffs for a build technique
In stock
Size: 36" screw diameter; 18' tub length
Machine weight: 9,910 lbs.
150-175 TPH capacity at 32 RPM
Maximum material size: 2 1/2" Driven sheave: 7.4" in diameter
Drive sheave: 9.3" in diameter, 3 groove, B-Section (optional)
Motor specifications: 30 HP, 1800 RPM, TEFC (optional)
Group: Machinery for construction